![]() ![]() Unauthorized access points connected to Sophos Firewall show in the pending access points section.Ĭlick the check mark to authorize your access point. You can see the list of active, inactive, and pending access points. When you save your settings, your new wireless network appears. The following image shows example wireless network settings: In the Client traffic section, select a method that'll determine how the wireless network integrates with your local network.Use the wireless network name as the NAS ID.Įnter a passphrase to protect the wireless network from unauthorized access, and re-enter the passphrase to confirm. When using enterprise authentication, you also need to configure a RADIUS server. The firewall supports IEEE 802.11r on networks that are secured with WPA2. The SSID can consist of 1-32 ASCII printable characters. It identifies the wireless network to users. The SSID is a unique identifier attached to the header of packets sent over a wireless local area network. The subsystems will show the customizable name and not the hardware name of the interface.Įnter a hardware name for the interface. Go to Wireless > Wireless networks and click Add.Įnter a name.To add a wireless network, do as follows: The following image shows example wireless settings: The access point becomes inactive when the time-out is reached. Under Time-out (in minutes), enter a time-out value. ![]() You can add the following zones: DMZ, LAN, and Wi-Fi. In the Allowed zone section, add the network zones used to connect the access points. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |